Table of Contents
Advertisement
Security Configuration Command Set
Configuring Secure Shell (SSH)
14.3.6.9 set ssh rekeyintervalseconds
Use this command to set the number of seconds between SSH key exchanges.
set ssh rekeyintervalseconds value
Syntax Description
value
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to set the SSH re-key interval to 7200 (2 hours):
Matrix>set ssh rekeyinterval 7200
14.3.6.10set ssh passwordguesses
Use this command to set the number of SSH authentication attempts allowed before access is
denied.
set ssh passwordguesses value
Syntax Description
value
Command Type
Switch command.
14-86
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Specifies the interval (in seconds) between SSH key
exchanges. Valid values are from 0 (which disables
re-keying) to 86400. Default is 3600.
Specifies the number of authentication attempts allowed
before remote access is denied. Valid values are from 1 to
10. Default is 3.
Advertisement
Table of Contents
