Table 14-4 show macauthentication session Output Details (Continued)
Output
Reauth Period
Reauthentications Whether or not reauthentication is enabled or disabled on
14.3.3.3 set macauthentication
Use this command to globally enable or disable MAC authentication.
set macauthentication {enable | disable}
Syntax Description
enable | disable
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to globally enable MAC authentication:
Matrix>set macauthentication enable
What It Displays...
Reauthentication period for this port, set using the set
macauthentication reauthperiod command described in
Section
14.3.3.11.
this port. Set using the set macauthentication
reauthentication command described in
Globally enables or disables MAC authentication.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Security Configuration Command Set
Configuring MAC Authentication
Section
14.3.3.8.
14-35