Table of Contents
Advertisement
•
set cep
(Section
•
set cep port
(Section
•
set cep policy
(Section
•
set cep detection
•
set cep detection type
•
set cep detection address
•
set cep detection protocol
•
set cep detection porthigh
•
set cep initialize
•
clear cep
(Section
11.2.6.1 show cep
Use this command to display CEP phone detection settings.
show cep [connections] [detection] [policy] [[port] [port-string]]
Syntax Description
connections
detection
policy
port port-string
Command Defaults
If no parameters are specified, all CEP settings will be displayed for all ports.
Command Mode
Read-Only.
11.2.6.2)
11.2.6.3)
11.2.6.4)
(Section
11.2.6.5)
(Section
11.2.6.6)
(Section
11.2.6.7)
(Section
11.2.6.8)
(Section
11.2.6.9)
(Section
11.2.6.10)
11.2.6.11)
(Optional) Displays CEP connections.
(Optional) Displays all discovery parameters being used for
CEP detection.
(Optional) Displays the global CEP policy per protocol.
(Optional) Displays CEP status for one or more ports. For a
detailed description of possible port-string values, refer to
Section
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Logging and Network Management Command Set
Configuring Convergence End Points (CEP) Phone Detection
4.1.2.
11-75
Advertisement
Table of Contents
