Changing the Network Configuration
Parameter
IP Configuration
IP Connectivity Test (Ping)
HTTP Configuration
MAX Number of Allowed Telnet
Sessions (1-4)
Physical Address
6.2.1
IP Configuration
Use the IP Configuration screen
parameters. The screen shown below is described in the following table.
Figure 6-3 IP Configuration Screen
6-4
Management Setup Menu Screens
Description
Used to set the bootup option, or configure the switch's IP
parameters.
Used to test IP connectivity (Ping) to a specified device.
Used to enable the Web Agent.
The maximum number of Telnet sessions allowed to
simultaneously access the agent module.
Physical address of the agent module.
(Figure
6-3) to set the bootup option, or configure the switch's IP