Table of Contents
Advertisement
Logging and Network Management Command Set
Monitoring Switch Network Events and Status
11.2.2.5 show history
Use this command to display the size (in lines) of the history buffer.
show history
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the size of the history buffer:
Matrix>show history
History buffer size: 3
11.2.2.6 set history
Use this command to set the size of the history buffer.
set history size
Syntax Description
size
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
11-26
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Specifies the size of the history buffer in lines. Valid values
are from 1 to 32.
Advertisement
Table of Contents
