Clear Spantree Maxhops - Enterasys 1G58x-09 Configuration Manual

Command Mode
Read-Write.
Example
This example shows how to set the maximum hop count to 40:
Matrix>set spantree maxhops 40

6.2.1.40 clear spantree maxhops

Use this command to reset the maximum hop count to the default value of 20.
clear spantree maxhops
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the maximum hop count to 20:
Matrix>clear spantree maxhops
Reviewing and Setting Spanning Tree Bridge Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Spanning Tree Configuration Command Set
6-35