Table of Contents
Advertisement
Command Mode
Read-Write.
Example
This command shows how to enable a Syslog server configuration for index 1, IP address
134.141.89.113, facility local4, severity level 8 (debugging) port 514:
Matrix>set logging server 1 ip_addr 134.141.89.113 facility local4 severity 8
port 514 state enable
11.2.1.7 clear logging server
Use this command to remove a server from the Syslog server table.
clear logging server index
Syntax Description
index
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This command shows how to remove the Syslog server with index 1 from the server table:
Matrix>clear logging server 1
11.2.1.8 show logging default
Use this command to display the Syslog server default values.
show logging default
Specifies the server table index number for the server to
be removed. Valid values are 1 - 8.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Logging and Network Management Command Set
Configuring System Logging
11-11
Advertisement
Table of Contents
