Configuring Secure Shell (Ssh) - Enterasys 1G58x-09 Configuration Manual

Security Configuration Command Set

Configuring Secure Shell (SSH)

Example
This example shows how to set the PWA control mode to auto for all ports:
Matrix>set pwa portcontrol auto
14.3.6 Configuring Secure Shell (SSH)
Purpose
To review, enable, disable, and configure the Secure Shell (SSH) protocol. SSH provides a secure,
remote connection to the device by permitting or denying access based on IP address, ciphers and
MAC algorithms.
Commands
The commands needed to review and configure SSH are listed below and described in the
associated section as shown:
•
show ssh (Section
•
ssh (server) (Section
•
set ssh (Section
•
set ssh ciphers (Section
•
clear ssh ciphers
•
set ssh port (Section
•
set ssh mac (Section
•
clear ssh mac (Section
•
set ssh rekeyintervalseconds
•
set ssh passwordguesses
•
set ssh logingracetime
•
clear ssh keys (Section
•
clear ssh config
14-78 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14.3.6.1)
14.3.6.2)
14.3.6.3)
14.3.6.4)
(Section 14.3.6.5)
14.3.6.6)
14.3.6.7)
14.3.6.8)
(Section
(Section 14.3.6.10)
(Section 14.3.6.11)
14.3.6.12)
(Section 14.3.6.13)
14.3.6.9)