Table of Contents
Advertisement
5.2.4.2
set snmp view
Use this command to set a MIB configuration for SNMPv3 view-based access (VACM).
set snmp view viewname subtree subtree [included | excluded] [volatile |
nonvolatile]
Syntax Description
viewname
subtree subtree
included | excluded (Optional) Specifies subtree use (default) or no subtree
volatile |
nonvolatile
Command Defaults
•
•
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set an SNMP MIB view to "public" with a subtree name of 1.3.6.1
included:
Matrix>set snmp view public subtree 1.3.6.1 included
5.2.4.3
clear snmp view
Use this command to delete an SNMPv3 MIB view.
clear snmp view viewname subtree subtree
Specifies a name for a MIB view
Specifies a MIB subtree name.
use.
(Optional) Specifies the use of temporary (default) or
nonvolatile storage.
If not specified, subtree use will be included.
If storage type is not specified, nonvolatile will be applied.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
SNMP Command Set
Configuring SNMP MIB Views
5-35
Advertisement
Table of Contents
