Table of Contents
Advertisement
Startup and General Configuration Summary
Command Defaults Descriptions
3.1.2
Command Defaults Descriptions
Each command description in this guide includes a section entitled "Command Defaults" which
contains different information than the factory default settings on the device as described in
Table 3-1
and
Table
command without optional parameters (indicated by square brackets [ ]). For commands without
optional parameters, the defaults section lists "None". For commands with optional parameters, this
section describes how the CLI responds if the user opts to enter only the keywords of the command
syntax.
Figure 3-1
provides an example.
Figure 3-1 Sample Command Default Description
Command Defaults
If port-string is not specified, status information for all ports will be displayed.
3-10
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3-2. The command defaults section defines CLI behavior if the user enters a
show port status [port-string]
Advertisement
Table of Contents
