Show Port Buffer Threshold - Enterasys 1G58x-09 Configuration Manual

Enterasys network device configuration guide

Table of Contents

Port Configuration Command Set

Setting Flow Control and Thesholds

show port buffer threshold

Use this command to display port buffer threshold settings.

show port buffer threshold

Syntax Description

Command Defaults

Command Type

Switch command.

Command Mode

This example shows how to display port buffer threshold settings. The output shows percentages

applied per port group for each priority queue within various ingress and egress threshold types, and

percentages applied for buffers within the EgressGeneral and IngressRx threshold types. For more

information on these threshold types and how to configure them using the set port buffer threshold

command, refer to

Matrix>show port buffer threshold

IngressSoftHOL

EgressUniPrio

EgressMultiPrio

EgressAllPrio

EgressSoftHOL

EgressGeneral

Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide

Fast Ethernet

100.0 100.0 100.0 100.0 : 100.0 100.0 100.0 100.0

Gigabit Ethernet

Priority Queue

FC On FC Off