Table of Contents
Advertisement
Example
This example shows how to set the size of the command history buffer to 3 lines:
Matrix>set history 3
11.2.2.7 show netstat
Use this command to display statistics for the switch's active network connections.
show netstat [icmp | interface | ip | routes | stats | tcp | udp]
Syntax Description
icmp
interface
ip
routes
stats
tcp
udp
Command Defaults
If no parameters are specified, show netstat will be executed as shown in the
example below.
Command Type
Switch command.
Command Mode
Read-Only.
(Optional) Displays Internet Control Message Protocol
(ICMP) statistics.
(Optional) Displays interface statistics.
(Optional) Displays Internet Protocol (IP) statistics.
(Optional) Displays the IP routing table.
(Optional) Displays all statistics for TCP, UDP, IP, and
ICMP.
(Optional) Displays Transmission Control Protocol
(TCP) statistics.
(Optional) Displays User Datagram Protocol (UDP)
statistics.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Logging and Network Management Command Set
Monitoring Switch Network Events and Status
11-27
Advertisement
Table of Contents
