Table of Contents
Advertisement
IGMP Configuration Command Set
Configuring IGMP VLAN Registration
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display IVR information for front panel Fast Ethernet ports 1 through 3:
Matrix>show igmp mode fe.0.1-3
IGMP MODE VLAN:
IGMP MODE IP: 10.1.2.3
Port
------------------------------------------------------------
fe.0.1
Table 10-2
Table 10-2 show igmp mode Output Details
Output
IGMP MODE
VLAN
IGMP MODE IP
Port
Type
10.2.4.2 set igmp mode vlan
Use this command to set the VLAN registered to forward multicast traffic to all subscribing, or
"open" ports.
set igmp mode vlan vlan_id
10-10
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
1
Mode
Port
open
fe.0.2
provides details of the command output.
What It Displays...
VLAN segment to be used by all ports running in IGMP
open mode.
Virtual IP address associated with the VLAN ID through
which all multicast traffic is forwarded.
Port designation.
Whether or not the port's IVR registration is:
•
Open — scoping multicast transmissions to the IGMP
VLAN. These ports are user access ports subscribing to
receive multicast streams via the IGMP registered VLAN.
•
Secure — scoping multicast transmissions to the VLAN
receiving the IGMP requests.
Mode
Port
open
fe.0.3
Mode
open
Advertisement
Table of Contents
