Table of Contents
Advertisement
3.2.2.3
show time
Use this command to display the current time of day in the system clock.
show time
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the current time. The output shows the day of the week, month,
day, year, hour, minutes, and seconds:
Matrix>show time
Thu 11/06/2001 08:24:28
3.2.2.4
set time
Use this command to change the time of day on the system clock.
set time {[day_of_week][mm/dd/yyyy][hh:mm:ss]}
Syntax Description
day_of_week
mm/dd/yyyy
hh:mm:ss
Command Defaults
At least one of the three optional parameters must be specified.
Command Type
Switch command.
(Optional) Specifies the day of the week.
(Optional) Specifies the month, day, and year.
(Optional) Specifies the current time in 24-hour format.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
General Configuration Command Set
Setting Basic Device Properties
3-33
Advertisement
Table of Contents
