Table of Contents
Advertisement
Security Configuration Command Set
Configuring RADIUS
Table 14-1 show radius Output Details (Continued)
Output
Server IP
Auth-Port
Status
RADIUS
last-resort-action
14.3.1.2 set radius
Use this command to enable, disable, or configure RADIUS authentication.
set radius {enable | disable | last-resort-action {local {accept | reject |
challenge} | remote {accept | reject | challenge}} | retries number-of-retries |
server index ip_address port server-secret | timeout timeout-value | mgmt-auth
{enable | disable}}
Syntax Description
enable | disable
last-resort-action Sets the action to be taken if the RADIUS server times out
local
remote
accept
reject
challenge
14-6
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
What It Displays...
IP address of the RADIUS server.
RADIUS server's UDP authentication port.
Whether the server is the primary or secondary RADIUS
server.
Last resort action to be taken if the RADIUS server times
out during local or remote login. Possible actions are:
Accept (allows access), Reject (doesn't allow access) and
Challenge (prompts for local password).
Enables or disables the RADIUS client.
during login.
Sets last-resort-action options for local (console port)
access.
Sets last-resort-action options for remote (Telnet or
WebView) access.
Allows access (via console port for local access, Telnet or
WebView for remote access) at the Read-Write level with
no further attempt at authentication.
Does not allow access.
Reverts to local passwords.
Advertisement
Table of Contents
