Table of Contents
Advertisement
Syntax Description
area-id
ip_address
ip_mask
Command Syntax of the "no" Form
The "no" form of this command stops the routes from being summarized:
no area area-id range ip_address ip_mask
Command Type
Router command.
Command Mode
Router configuration: Matrix>Router(config-router)#
Command Defaults
None.
Example
This example shows how to define the address range as 172.16.0.0/16 for summarized routes
communicated at the boundary of area 0.0.0.0:
Matrix>Router(config)#router ospf 1
Matrix>Router(config-router)#area 0.0.0.0 range 172.16.0.0 255.255.0.0
13.1.2.15area authentication
Use this command to enable or disable authentication for an OSPF area.
area area-id authentication {simple | message-digest}
Specifies the area at the boundary of which routes are to be
summarized.
Specifies the common prefix of the summarized networks.
Specifies the length of the common prefix.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Process Overview: Routing Protocol Configuration
Configuring OSPF
13-41
Advertisement
Table of Contents
