Table of Contents
Advertisement
4.3.5.1
show port negotiation
Use this command to display the status of auto-negotiation for one or more ports.
show port negotiation [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, auto-negotiation status for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display auto-negotiation status on Fast Ethernet expansion module 3,
port 1:
Matrix>show port negotiation fe.3.1
Auto negotiation enabled for port fe.3.1.
Setting Port Auto-Negotiation and Advertised Ability
(Optional) Displays auto-negotiation status for specific
port(s). For a detailed description of possible port-string
values, refer to
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Port Configuration Command Set
Section
4.1.2.
4-21
Advertisement
Table of Contents
