Table of Contents
Advertisement
Security Configuration Command Set
Configuring MAC Locking
Table 14-5 show maclock Output Details
Output
Port Number
Port Status
Trap Status
Max Static
Allocated
Max FirstArrival
Allocated
Violating MAC
Address
14.3.4.2 show maclock stations
Use this command to display MAC locking information about end stations connected to the device.
show maclock stations [port-string] [firstarrival | firstarrival port-string] [static
| static port-string]
14-46
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
What It Displays...
Port designation. For a detailed description of possible
port-string values, refer to
Whether MAC locking is enabled or disabled on the port.
MAC locking is globally disabled by default. For details on
using set maclock commands to enable it on the device and
on one or more ports, refer to
Section
14.3.4.5.
Whether MAC lock trap messaging is enabled or disabled
on the port. For details on setting this status using the set
maclock trap command, refer to
The maximum static MAC addresses allowed locked to the
port. For details on setting this value using the set maclock
static command, refer to
The maximum end station MAC addresses allowed locked
to the port. For details on setting this value using the set
maclock firstarrival command, refer to
Any MAC address(es) violating the maximum static and
first arrival value(s) set for the port.
Section
4.1.2.
Section 14.3.4.3
Section
14.3.4.17.
Section
14.3.4.7.
Section
and
14.3.4.6.
Advertisement
Table of Contents
