12.2.5 Reviewing IP Traffic and Configuring Routes
Purpose
To review IP protocol information about the device, to review IP traffic and configure routes, to
enable and send router ICMP (ping) messages, and execute traceroute.
Commands
The commands needed to review IP traffic and configure routes are listed below and described in
the associated section as shown:
•
show ip protocols
•
show limits
(Section
•
show ip traffic
(Section
•
clear ip stats
(Section
•
show ip route
(Section
•
ip route
(Section
•
ip icmp
(Section
•
ping
(Section
12.2.5.8)
•
traceroute
(Section
12.2.5.1 show ip protocols
Use this command to display information about IP protocols running on the device.
show ip protocols
Syntax Description
None.
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Command Defaults
None.
(Section
12.2.5.1)
12.2.5.2)
12.2.5.3)
12.2.5.4)
12.2.5.5)
12.2.5.6)
12.2.5.7)
12.2.5.9)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
IP Configuration Command Set
Reviewing IP Traffic and Configuring Routes
12-27