Set Cep - Enterasys 1G58x-09 Configuration Manual

Logging and Network Management Command Set
Configuring Convergence End Points (CEP) Phone Detection
Examples
This example shows how to display CEP status for each detection type on port ge.0.1. In this case
the default state of disabled for each type has not been changed:
Matrix>show cep port ge.0.1
CEP Detection:
ge.0.1
This example shows default CEP policy information. In this case, no policies have been configured
for the three CEP detection types:
Matrix>show cep policy
CEP default policies

11.2.6.2 set cep

Use this command to globally enable or disable CEP detection.
set cep {enable | disable}
Syntax Description
enable | disable
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
11-76 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
H323 phone
Siemens phone
Cisco phone
CEP Type Policy Index
-------- ------------
H323
Siemens
Cisco
Globally enables or disables CEP detection.
- disabled
- disabled
- disabled
- disabled
Policy Name
------------