11.2.5.2 show nodealias config
Use this command to display node alias configuration settings on one or more ports.
show nodealias config [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, node alias configurations will be displayed for all
ports.
Command Mode
Read-Only.
Example
This example shows how to display node alias configuration settings for all Gigabit Ethernet ports:
Matrix>show nodealias config ge.*.*
Total Control Entries = 11
Purge Time
Allocated Entries
Port Number
Max Entries
-----------
-----------
ge.0.1
ge.0.2
ge.0.3
ge.0.4
ge.0.5
ge.0.6
Table 11-8
(Optional) Displays node alias configuration settings for
specific port(s). For a detailed description of possible
port-string values, refer to
= 0
days 00:00:00
= 4092
Used Entries
------------
682
682
682
682
682
682
provides an explanation of the command output.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Logging and Network Management Command Set
Section
Active Entries
State
Available Entries = 4
Status
--------
0
Enabled
0
Enabled
0
Enabled
0
Enabled
0
Enabled
11
Enabled
Configuring Node Aliases
4.1.2.
= 11
= Ready
11-69