Table of Contents
Advertisement
Table 6-1 show spantree stats Output Details (Continued)
Output
Max Hops
SID
Port
State
Role
Cost
Priority
6.2.1.2
set spantree
Use this command to globally enable or disable the Spanning Tree protocol on the switch.
set spantree {disable | enable}
Syntax Description
disable | enable
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Reviewing and Setting Spanning Tree Bridge Parameters
What It Displays...
Spanning Tree maximum hop count. Default of 20
can be changed using the set spantree maxhops
command, as described in
Spanning Tree ID.
Spanning Tree port designation. For a detailed
description of possible port-string values, refer to
Section
Spanning Tree port state (listening, learning,
forwarding or blocked).
Whether the port's Spanning Tree role is root,
designated, backup, alternate, disabled or master.
Cost value assigned to the port.
Port's Spanning Tree priority.
Globally disables or enables Spanning Tree.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Spanning Tree Configuration Command Set
Section
4.1.2.
6.2.1.39.
6-9
Advertisement
Table of Contents
