This chapter describes the Outdoor AP3620 NEMA solution contents, lists the separately ordered
components that can be used with the solution, and provides installation instructions.
Overview
This product solution allows you to install the AP3620 outdoors by enclosing the AP in a
weatherproof NEMA Type 3R/ IP42 rated enclosure that provides both heating and cooling. The
enclosure is molded fiberglass reinforced polyester, with stainless steel quick release latches with
padlock hasps, and can be mounted on a pole or wall.
The enclosure shipped with the WS‐AP36OUTNAM comes with a 120 VAC 200 watt heating
element and 120 VAC cooling fan. The fan turn‐on temperature is +93
element turn‐on temperature is 9
Surge protection is provided on the internal AC outlets, and 3 bulkhead‐mount Reverse Polarity
Type‐N Jack form factor lightning protectors are installed for connections to the external antennas.
In addition to the AP3620, the solution also includes a PoE power injector, all necessary cables to
complete the installation of the AP in the enclosure, and a pole mount kit.
Solution Contents
The outdoor solution includes the following components:
•
One Enterasys Wireless 802.11n AP3620 (WS‐AP3620), with wall mounting bracket. One
plastic rivet (to secure the AP to the bracket) and other screws are packaged with the wall
mounting bracket in a small plastic bag.
•
One fiberglass enclosure, with PoE adapter, lightning protectors, and cables installed.
•
One pole mount kit (accommodates poles from 2 to 4 inches in diameter).
Separately Ordered Components
The following components must be ordered separately from Enterasys Networks.
Outdoor AP3620 NEMA Solution
Note: The kit contains U bolts suitable for 2 to 4 inch diameter poles, but the brackets in the kit have
holes that can accommodate smaller U bolts for 1.25 to 2 inch diameter poles. You can supply your
own smaller U bolts and attach the enclosure to a smaller diameter pole.
Description and Installation
o
o
F (5
C).
Outdoor AP3620 NEMA Solution Installation Guide 2-1
2
o
o
F (+34
C). The heating