Tektronix AWG2021 User Manual page 398

Other Settings and Displays
Setting the Display
AWG2021 User Manual
minute is set at the same time the second is reset to 0. (The second is also
reset to 00 when the hour is set with Hour.)
The date and time can be permanently displayed on the screen if desired. See
"Date/Time Display" on Page 3 -283.
Use Misc from the bottom menu to set or display the following:
H Display...
Brightness
Catalog Order
Date Time
H Config...
Reset to Factory
Secure Erase Memory Deleting Data From Memory
Remote Port
H Hardcopy...
Format
Port
H Status...
System
I/O
The following diagram shows the menu configuration for Display....
Misc Display...
We will discuss the Brightness, Catalog Order and Date Time items in the
sub-menu.
Setting the Display Brightness
Setting the Order of Files
Date/Time Display
Factory Settings
Remote Port Settings
Selecting the Hard Copy Output Format
Selecting the Hard Copy Output Port
System and GPIB/RS-232-C Status
I/O Event Reporting
Brightness
Catalog Order
Date Time
UTILITY Menu
Name1
Name2
Time1
Time2
Type1
Type2
Type3
Type4
Off
On
3 279