Tektronix AWG2021 User Manual page 304

AWG2021 User Manual
H Offset Settings. Using the general purpose knob, select the
for the channel that you want to change and then press the VALUE button on
the front panel. The menu shown in Figure 3 -135 will appear.
Figure 3 135: Offset Setting Menu
Select the appropriate item in the side menu and set the offset.
Offset
Default Value
Select this item and use the numeric keys or the
general purpose knob to set the desired offset value.
This item sets the offset to the default value of
0.000 V.
After setting the offset, select O.K. from the side
menu. The value for offset will be updated to the
value you have set.
EDIT Menu
3 185