Tektronix AWG2021 User Manual page 144

AWG2021 User Manual
Bottom Menu
Zoom
Setting
Undo
Standard
Waveform
Close/Write
*1 Another Waveform under Select/Open in the bottom menu appears when another editing area has been
edited.
*2 If Horizontal is selected for Scale in the sub menu, New Size appears; if Vertical is selected, Origin
appears.
*3 The Horizontal Zoom in item under Zoom in the bottom menu item appears when the waveform on the
screen has been zoomed in the horizontal direction.
*4 The Vertical Zoom in item under Zoom in the bottom menu appears when the waveform on the screen
has been zoomed in the vertical direction.
*5 This item appears when Time has been selected for Horiz. Unit in the side menu.
*6 If Point is selected for Horiz. Unit under Setting in the bottom menu, Cycle appears; if Time is selected
for this item, Frequency appears.
Figure 3 14: Waveform Editor Graphic Display Menu Structure (Cont.)
Side Menu
Horizontal Zoom in
*3
Horizontal Zoom out
Horizontal Zoom fit
*3
Horizontal Pan
*3
Vertical Zoom in
Vertical Zoom out
*4
Vertical Zoom fit *4
Vertical Pan
*4
Waveform Points
View type...
Horiz.Unit
Clock *5
Cursor Link to... *1
Grid
Type
Cycle
*6
Frequency
*6
Amplitude
Offset
Write and Close
Close without Writing
Write
EDIT Menu
Sub Menu
Graphic
Timing
Table
Waveformx
Waveformxx
Link Off
3 25