Tektronix AWG2021 User Manual page 323

EDIT Menu
Magnifying a Signal
3 204
Figure 3 145: Drawing a Magnitude
9. To cancel the execution of a draw operation, select Undo from the bottom
menu. The screen will revert to the waveform before Execute was selected.
NOTE. When you quit and once again enter the waveform editor, the points you
have drawn will disappear.
10. Select Go Back from the sub-menu. The system returns from the Draw...
sub-menu to the previous side menu.
This concludes the draw process.
Select Zoom from the bottom menu to display menu items that magnify the
signal to x1, x4, x8, x16, or x64 along the frequency axis. Figure 3 -146 shows
the magnified signal display when Zoom is selected from the bottom menu with
x16 is selected.
AWG2021 User Manual