Tektronix AWG2021 User Manual page 307

EDIT Menu
Jumping to a Step
3 188
6. Press Range in the sub-menu and select Current Step or All Steps.
Current step
All Steps
7. Select Execute in the sub-menu.
Data will be exchanged between the designated steps in the designated
channels.
Use Jump in the bottom menu to go quickly to a certain step in the autostep
program. Using the items in the side menu, you can jump to the first step, the
last step or to any step in between.
Step No.
To First Step
To Last Step
Swaps only the contents of the current step.
Swaps the contents of all steps.
Used to move to a step other than the first or last
step.
Use the numeric keys or the general purpose knob to
enter the number of the desired step.
Used to move to the first step.
Used to move to the last step.
AWG2021 User Manual