Tektronix AWG2021 User Manual page 161

EDIT Menu
3 42
Invert...
Clip...
Marker...
Insert Other Waveform
Single Waveform Math...
Dual Waveform Math....
Region Shift...
When editing two or more waveforms simultaneously, three more items are
added to the side menu (and the size of the menu increases to four pages).
Multiple Copy...
Convolute...
Compare...
Items with "..." have further low-level side menus, called sub-menus.
Setting Editing Areas. The editing operations available under Operation are all
performed in the editing area located between the left and right vertical bar
cursors. Before beginning the editing process, you should define the editing area
using the following procedure.
1. Select Operation from the bottom menu.
2. Press the CURSOR button on the front panel to make the left vertical cursor
active (solid line).
3. Using the numeric keys or the general purpose knob, move the left cursor to
the starting point for the editing operation you wish to perform.
4. Press the CURSOR button on the front panel again to make the right vertical
cursor active (solid line).
5. Using the numeric keys or the general purpose knob, move the right cursor
to the endpoint for the editing operation you wish to perform.
Invert function
Clip function
Setting a marker
Inserting other waveforms
Single waveform calculations
Calculations with other waveform data
Specified region shift
Multiple copy
Convolution calculations
Comparing waveforms
AWG2021 User Manual