Rack Mounting (Ears) - Safran SecureSync 2400 User Manual

2.5.1

Rack Mounting (Ears)

The SecureSync
ing:
The 2400-0000-0704 ruggedization ancillary kit (optional) contains additional
mounting items available for purchase:
The following customer supplied items are also needed:
To rack mount the SecureSync unit:
CHAPTER •
2 SecureSync 2400 User Manual Rev. 5.2
ancillary kit
2 each 2400-1000-0714 equipment rack mount ears
6 each HM20R-04R7-0010 M4 flat head Phillips screws
2 each 2400-1000-0706 rear rack mount ears
2 each HM20R-04R7-0010 M4 flat head Phillips screws
4 each #10-32 pan head rack mount screws
1 each #2 Phillips head screwdriver
1 each 3/32" straight screwdriver
1. Attach the 2400- 1000- 0714 rack mount ears to the sides of the
SecureSync with the ears facing outward, aligned with the front edge of the
SecureSync front panel. (See image below). To secure, use the #2 Phillips
screwdriver, and 3 each of the HM20R- 04R7- 0010 M4 flat head Phillips
screws per side.
Figure 2-1: Rack mount installation
contains the following parts needed for rack mount-
2.5 Mounting the Unit
49