Safran SecureSync 2400 User Manual page 581

Available Formats 1 and 1S are very similar to each other. Most external systems
utilizing Data Format 1 will look for a single- digit day of the month for day 1
through day 9, with a space in front of each digit ( ^1, ^2, ^3 ... 10, 11... ), whereas
other systems need to see a two digit day of the month for all days 1 through 9
with a leading 0 instead of a space (01, 02, 03... 10, 11...).
If your device requires the two digit day of the month for days 1 through 9
(i.e. 01, 02 etc.), select Format 1.
If your device requires the single digit day of the month for days 1 through 9
(i.e. ^1, ^2, etc.), select Format 1S instead. Refer to
on the next page
F o r m a t
CR LF I ^ WWW ^ DDMMMYY ^ HH:MM:SS CR LF
Where:
CR Carriage Return
LF Line Feed
I Time Sync Status (space, ?, *)
^ Space separator
WWW Day of Week (SUN, MON, TUE, WED, THU, FRI, SAT)
DD Numerical Day of Month (01-31)
MMM Month (JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC)
YY Year without century (99, 00, 01, etc.)
HH Hours (00-23)
: Colon separator
MM Minutes (00-59)
SS Seconds (00-60)
The leading edge of the first character (CR) marks the on-time point of the data
stream.
The time synchronization status character (I) is defined as described below:
? When the receiver is unable to track any satellites and the time synchronization lamp is
red.
SecureSync 2400 User Manual
for information on Format 1S.
1 d a t a s t r u c t u r e :
"Spectracom Format 1S"
APPENDIX
565