Safran SecureSync 2400 User Manual page 234

3.3 Managing References
To configure these settings:
1. Navigate to
2. In the
3. In the
Configuring BroadShield
To configure BroadShield:
1. Navigate to
2. Click
BROADSIGHT
BroadSight is a service that allows collection of data from multiple BroadShield
units and provides a dashboard view of the data.
218
Auto Sync Control: In the event jamming or spoofing is detected,
SecureSync will emit a Major Alarm AND it will go into Holdover mode.
TOOLS: SYSTEM >
BroadShield Service
Note: Turning BroadShield
an invalid setting and will cause a
unit..." error.
BroadShield Web UI
ALGORITHMS, and ensure that
enabled.
TOOLS: SYSTEM >
Web UI will open. If you cannot enable Broadshield from this screen, this
license is not present.
SETTINGS to open the following sub-menus:
Note: BroadSight for SecureSync is currently not supported.
Broadshield.
panel on the left, configure the desired setting:
OFF and Auto Sync Control
"Failed to connect to the
on the right, navigate to
Jamming and/or
Broadshield. The embedded Broadshield
CHAPTER •
3 SecureSync 2400 User Manual Rev. 5.2
ON
SETTINGS >
Spoofing detection are
is