Adding/Removing A Tacacs+ Server - Safran SecureSync 2400 User Manual

4.3.6.2

Adding/Removing a TACACS+ Server

To add a TACACS+ authentication server, or remove a server from the list:
CHAPTER •
4 SecureSync 2400 User Manual Rev. 5.2
1. In the Web UI, navigate to
2. In the Actions panel on the left, click TACACS+. The
dow will be displayed.
3. Configure the Default User Group
missions level (Admin or User)
4. Under Enable TACACS+, click the toggle to
click the toggle to
5. Click Submit.
1. Navigate to MANAGEMENT > OTHER:
2. In the Actions panel on the left, click
Setup window will be displayed:
3. Fill out the fields:
Host: The hostname or IP address of the TACACS+ server
Port: Defines the TACACS+ Port to use.
MANAGEMENT > OTHER:
to select your preferred default user per-
OFF to disable this feature.
TACACS+
4.3 Managing Users and Security
Authentication.
TACACS+ Setup
ON to enable TACACS+, and
Authentication.
Setup. The TACACS+
win-
295