Safran SecureSync 2400 User Manual page 496

APPENDIX
HAVE QUICK Output: Edit Window
To configure the settings of a HAVE QUICK Output, go to its Edit window. For
instructions, see:
The Web UI list entry for this card is: HAVE QUICK In/Out.
Outputs are named: HQ Output [number].
The Edit window allows the configuration of the following settings:
480
GPS: The raw GPS time as transmitted by the GNSS satellites (as of
22-August-2023, this is 18 seconds ahead of UTC time).
Offset: Provides the ability to account for HAVE QUICK cable delays or
other latencies in the HAVE QUICK outputs. The Offset values are entered
in nanoseconds (ns). The available Offset range is –500 to +500 ms.
TFOM: The Time Figure of Merit for the input.
"Configuring Option Card Inputs/Outputs" on
Signature Control: Signature Control is used to control when the HAVE
QUICK modulation is present, see
Format: Used to configure the formatting of the four available HAVE
QUICK outputs. The available output formats are as follows:
STANAG 4246 HQ I
STANAG 4246 HQ II
STANAG 4372 HQ IIA
STANAG 4430 Ext HQ (Extended HAVE QUICK)
"Signature Control" on
SecureSync 2400 User Manual
page 364.
page 183.