Selecting A Gnss Receiver Mode - Safran SecureSync 2400 User Manual

u-blox
Production dates: Since 2016
Constellations: GPS, Galileo, GLONASS, BeiDou, QZSS
Other characteristics:
3.3.3.3

Selecting a GNSS Receiver Mode

When connected to a GNSS antenna that receives a GNSS signal, SecureSync
can use GNSS as an input reference. The factory default configuration allows
GNSS satellites to be received/tracked with no additional user intervention
required.
CHAPTER •
3 SecureSync 2400 User Manual Rev. 5.2
®
M8T
Client A-GPS option: Yes
Server A-GNSS option: Yes
Resurvey: Automatic, after being moved and rebooted — can be changed,
see "Setting GNSS Receiver Dynamics" on
Multi-GNSS reception: Yes, within these permissible settings:
Galile- GLONAS-
GPS
o S
X X –
X X X
X X –
X – X
X – –
– X X
– X –
– – X
Note: The augmentation systems SBAS and QZSS can be
enabled only if
page 234.
Beido-
u
–
–
X
–
X
–
X
X
GPS operation is configured.
3.3 Managing References
231