2.14.8.3 Snmp Traps - Safran SecureSync 2400 User Manual

Hide thumbs Also See for SecureSync 2400:

Table of Contents

2.14 Configure Network Settings

Editing and Deleting Users

To edit or delete a user you have created:

1. Navigate to

2. Click the row of the

4. Apply your changes and click Submit. OR: Click

2.14.8.3 SNMP Traps

SNMP traps allow for automatic event notification, and as such are one way to

remotely monitor SecureSync's status.

SNMP traps indicate the status change that caused the trap to be sent and may

also include one or more objects, referred to as variable-bindings, or varbinds. A

varbind provides a current SecureSync data object that is related to the specific

trap that was sent. For example, when a Holdover trap is sent because

SecureSync either entered or exited the Holdover mode, the trap varbind will

indicate that SecureSync is either currently in Holdover mode or not currently in

Holdover mode.

For testing purposes, a command line interface command is provided. This com-

mand, testevent, allows one, several, or all of the traps defined in the

MANAGEMENT > NETWORK: SNMP

to edit or delete. The cursor will change from an arrow icon to a pointing fin-

ger to indicate that the entry is clickable.

SNMP V3 Settings

panel that displays the community you wish

window will display:

to remove the User.

SecureSync 2400 User Manual Rev. 5.2