Further Reading - Safran SecureSync 2400 User Manual

Serial Feedback
The serial connection on the rear panel provides feedback during the sanitization
process, even during states where the unit is otherwise unreachable, provides
time estimates during each major state transition, and ends with the com-
munication that the unit is being brought into a Halt state.
If you prefer, it is also possible to begin the sanitization process through the CLI.
After uploading the desired file (via the Web UI, SSH, or some other desired con-
nection), you can run the command swupgrade [file] --sanitize
4.7.8.2

Further Reading

Additional information regarding Sanitization and Volatility may be found in the
Safrana website. To obtain a Certificate of Volatility for SecureSync, contact
Safran Trusted 4D Technical Support (see
CHAPTER •
4 SecureSync 2400 User Manual Rev. 5.2
will be the last to remain flashing, and this will indicate that the unit is on the
final step.
7. After the unit is fully halted (no LEDs will be flashing), the process is fin-
ished and you can safely remove power. At this point, no user data or usage
data exists on the unit.
4.7 Backing-up and Restoring Configuration Files
"Technical Support" on page 605).
349