Safran SecureSync 2400 User Manual page 304

4.3 Managing Users and Security
c. Locate and upload the certificate or client key file.
d. Click
e.
The SSL certificates and/or client key you upload will be installed in the
/home/spectracom/xfer/cert/ directory.
LDAP Group Settings
Under the LDAP Group tab, you can filter access by group.
To enable group authentication:
a. Select the
b. Enter information for:
288
Apply to apply settings while the window remains open. Click
to apply settings and close the Certificate window.
Verify the Status:
NO CERTIFICATE INSTALLED (red): The certificate file is not found.
*CERTIFICATE IS VALID (green: The certificate file is present and
installed correctly. Additional certificate details are also displayed.
*UNRECOGNIZED CERTIFICATE FORMAT (red): The certificate file is
present and not valid. (The client key will display this message even if
it has a recognized certificate format).
Enable group filter
Group Attribute—Enter the group attribute. Example: dis-
tinguishedName for AD or gidNumber for OpenLDAP.
Group Value—Enter the required group. Example: ou=Group,
dc=example, dc=com.
Membership Attribute— Enter the attribute of the above group that
will specify a user of that group. Example: member or memberUid.
checkbox.
CHAPTER •
4 SecureSync 2400 User Manual Rev. 5.2
Submit