Applying A License File - Safran SecureSync 2400 User Manual

Hide thumbs Also See for SecureSync 2400:

Table of Contents

Applying a License File

Software options must be activated by applying a license file (OPT-xyz):

Typically, SecureSync units are shipped with the license file pre-installed, reflect-

ing the system configuration as ordered. If, however, a feature is to be activated

after delivery of the SecureSync unit, please contact your local Safran Sales

Office first to have a license file generated. License files are archive files with a

tar.gz extension. One license file may contain multiple licenses for multiple

To apply the license file, you need to upload it into your SecureSync unit and

SecureSync 2400 User Manual Rev. 5.2

Perform clean update: Factory settings will be applied during the

upgrade; any custom settings you may have applied previously will

be overwritten! This also includes the unit's static IP address (if you

applied one): it will be replaced by the default DHCP address (i.e.,

0.0.0.0.) Also note that the browser session will terminate: After

reconfiguring the unit's IP address, you will need to login to the Web

UI in a new browser session.

to carry out the update. A progress bar will provide real-time

status information:

7. Verify that the update was successful: Navigate to

Upgrade/Backup, and confirm the new SW version in the

Should you use DHCP, a new IP address may be assigned to

your unit, and you may have to point your web browser to it.

In the event that the update failed, see

ware Update" on

4.6 Updates and Licenses

"Troubleshooting Soft-