Safran SecureSync 2400 User Manual page 120

2.14 Configure Network Settings
To obtain the MIB files from SecureSync via FTP/SFTP:
1. Using an FTP program, log in as an administrator.
2. Through the FTP program, locate Safran Trusted 4D's Spectracom MIB files
3. FTP the files to the desired location on your PC for later transfer to the
4. Compile the MIB files onto the SNMP Manager.
104
Note: SecureSync 2400 Time and Frequency Synchronization Sys-
tem only uses SFTP to ensure increased security as of software ver-
sion 1.2.0.
in the /home/spectracom/mibs directory.
SNMP Manager.
Note: When compiling the MIB files, some SNMP Manager pro-
grams may require the MIB files to be named something other
than the current names for the files. The MIB file names may be
changed or edited as necessary to meet the requirements of
the SNMP Manager. Refer to the SNMP Manager doc-
umentation for more information on these requirements.
Note: In addition to the Orolia/Spectracom MIB files, there are
also some net-snmp MIB files provided. Net-snmp is the embed-
ded SNMP agent that is used in the SecureSync and it provides
traps to notify the user when it starts, restarts, or shuts down.
These MIB files may also be compiled into your SNMP manager,
if they are not already present.
Safran Trusted 4D's private enterprise MIB files can be requested and
obtained from the Safran Customer Service department via email at
TimingSupport@nav-timing.SafranGroup.com.
Note: By default,
the sysContact field of the SNMP Status panel of the SNMP
Setup page.
TimingSupport@Orolia.com
CHAPTER •
2 SecureSync 2400 User Manual Rev. 5.2
is the address in