Table of Contents
Advertisement
1PPS
Offset: Used to account for 1PPS cable delays or other latencies in the
1PPS input. Available Offset range is –500 to +500 ms in 5ns steps
PPS
Edge: The operator can select if the output signal is a rising or falling
edge pulse.
PPS Electrical
(supporting up to 10 V levels) signal lines.
STANAG Input: Status Window
To view the current settings of a STANAG Input (also referred to as 'Reference'),
go to its Status window. For instructions, see:
figuration Settings" on
The Web UI list entries for this card are: STANAG In and STANAG In, Isolated.
The inputs are named: Stanag HQ Input [number].
SecureSync 2400 User Manual
Format: Selects synchronization to either RS-485 or TTL
page 363.
"Viewing Input/Output Con-
APPENDIX
467
Advertisement
Table of Contents
Troubleshooting
