Safran SecureSync 2400 User Manual page 437

Note:
SecureSync. Numbering for alarm outputs from the option card will
begin at Alarm 4, which is available on the DB-9 output, while Alarms
5 and 6 are assigned to the RJ-12 connector.
Note:
both the DB-9 and RJ-12 connectors. For additional information on
alarm types, see
The Edit window allows the configuration of the following settings:
Alarm
None—Will not output for an alarm
Minor—Will output on a minor alarm
Major—Will output on a major alarm.
SecureSync 2400 User Manual
Alarm Output 0 through Alarm Output 3 are reserved by
You can configure the alarm type (None, Minor, or Major) for
"Minor and Major Alarms" on
Type:
page 352.
APPENDIX
421