The Edit window allows the configuration of the following settings:
Signature
present. This function allows the modulation to stop under certain
conditions; see also
Format: Used to configure the desired IRIG output formatting. The avail-
able choices are:
IRIG A
IRIG B
IRIG G
IRIG E
NASA-36
Modulation: Changes the type of output signal modulation. The available
choices are:
IRIG DCLS: TTL-modulated output
IRIG AM: Amplitude-modulated output. The amplitude of the output
is determined by the value entered in the
Frequency: The IRIG modulation frequency. This is determined by the con-
figuration of Format and Modulation Type. See
on page 588
SecureSync 2400 User Manual
Control: Used to control when the IRIG modulation will be
"Signature Control" on
for details.
page 183.
Amplitude
field.
"IRIG Carrier Frequencies"
APPENDIX
435