Safran SecureSync 2400 User Manual page 248

3.3 Managing References
However, there are several user-configurable GNSS settings:
To configure the GNSS Receiver Mode for your SecureSync unit:
1. Navigate to
2. Select
3. Select the desired Receiver Mode, and click Submit.
GNSS Receiver Modes
The receiver modes are:
Standard GNSS Receiver Mode
The default GNSS receiver mode is the Standard Mode: It is the most accurate,
and hence the preferred GNSS receiver mode.
The Standard Mode can be used only for stationary applications, i.e. the
SecureSync unit will not be moved. Also, it must be able to track initially at last
four satellites in order to complete the survey. (Once the survey is completed,
less than four satellites will provide a valid Time and 1PPS.)
232
The Receiver Mode
a stationary mode ("Standard" or
mode environment e.g., in a vehicle, ship or aircraft.
Offset [ns]: to account for antenna cable delays and other latencies
Receiver dynamics: to optimize performance for land, sea or air operation
The ability to delete
gitude and antenna height).
The option to determine when a
only by newer GNSS receivers).
The option to select your constellation types
INTERFACES >
panel will open.
Edit in the bottom-left corner. The
will open:
function allows the GNSS receiver to operate in either
"Single
the stored GNSS position information (latitude, lon-
resurvey
REFERENCES: GNSS 0. The
CHAPTER
Satellite" modes), or in a mobile
is to be performed (supported
GNSS 0
GNSS 0 configuration window
•
3 SecureSync 2400 User Manual Rev. 5.2
Status