Safran SecureSync 2400 User Manual page 223

Adding an Entry to the Reference Status Table
To add a new entry to the Reference Status table:
Deleting a Reference Entry
To delete an entry from the Reference Status table:
Reordering Reference Entries
To reorder the priority of a reference entry:
CHAPTER •
3 SecureSync 2400 User Manual Rev. 5.2
1. Navigate to the Configure Reference Priorities
> OTHER: Reference
2. Click the PLUS icon in the top right-hand corner of the
ence Priorities table.
3. The Add Reference
4. In the Add Reference
Priority Level: Assign a priority to the new reference.
Time: Select the time reference.
PPS: Select the PPS reference.
Enabled: Check this box to enable the new reference.
5. Click Apply or Submit.
1. Navigate to the Configure Reference Priorities
> OTHER: Reference
2. In the Configure Reference Priorities
right-hand side of the entry you wish to delete.
3. In the pop-up window that opens click
1. Navigate to the Configure Reference Priorities
> OTHER: Reference
Priority.
window will display:
window, enter:
(Submit will close the window.)
Priority.
table click the
OK
Priority.
3.3 Managing References
screen via MANAGEMENT
Configure Refer-
screen via MANAGEMENT
Delete button on the
to confirm.
screen via MANAGEMENT
207