Safran SecureSync 2400 User Manual page 408

APPENDIX
Figure 5-20:
1PPS Input or Output: Viewing Signal State
To quickly view if the 1PPS inputs and outputs of this option card are currently
enabled or disabled, go to the option card's Status Summary panel. For instruc-
tions, see:
1PPS Output: Edit Window
To configure the settings of a 1PPS output, go to its Edit window. For instruc-
tions, see:
The Web UI list entries for these cards are:
The connector numbers are:
392
Optical Input Minimum
Optical Output Power: -15 dBm average into 50/125 fiber
Fiber Optic Compatibility: 50/125 μm, 62.5/125 μm multi-mode cable
Optical Connector: ST
Output Programmable Pulse
olution
Output Absolute Phase
Output Programmable Phase
Maximum Number of
Ordering Information: 1204-2A: 1PPS 1-in/2-output, ST connectors
Model 1204-2A option card rear plate
"Viewing an Input/Output Signal State" on
"Configuring Option Card Inputs/Outputs" on
1PPS In/Out
1PPS In/Out, Fiber
J2, J3, J4 (model -28)
J2, J3 (model -2A)
Sensitivity: -25 dBm @ 820 nanometers
Width: 100 ns to 900 ms with 20 ns res-
Error: ±50 ns (1σ)
Shift: ±5ns to 500 ms with 5ns resolution
Cards: 6
page 366.
page 364.
SecureSync 2400 User Manual