Safran SecureSync 2400 User Manual page 334

4.5 Quality Management
1. To access the
2. The
318
NTP Status Summary
NETWORK: NTP Setup.
NTP Status Summary
contains the following information:
Selected Ref—The reference SecureSync is currently using.
Stratum—This is the stratum level at which SecureSync is operating.
Leap Indicator—The leap indicator bits (usually 00). See
Second Alert Notification" on
Delay (ms)—The measured one-way delay between SecureSync and
its selected reference.
Time Offset—This is a graphical representation of the system time off-
set over time. Clicking on this graph in the NTP Status Summary panel
will open a window in the main panel containing a larger, more
detailed view of the graph. See
Graph" on the facing
Offset (ms)—Displays the configured 1PPS offset values.
Frequency Offset—This is a graphical representation of the system
frequency offset over time. Clicking on this graph in the NTP Status
Summary panel will open a window in the main panel containing a lar-
ger, more detailed view of the graph. See
Performance Graph" on
panel, navigate to
panel is at the lower left of the screen. The panel
page 197.
"The NTP Time Offset Performance
page.
page 320.
CHAPTER •
4 SecureSync 2400 User Manual Rev. 5.2
MANAGEMENT >
"Leap
"The NTP Frequency Offset