General Network Settings - Safran SecureSync 2400 User Manual

2.14.1

General Network Settings

To expedite network setup, SecureSync provides the General Settings window,
allowing quick access to the primary network settings.
To access the General Settings window:
CHAPTER •
2 SecureSync 2400 User Manual Rev. 5.2
HTTPS: This button takes you to the
details on setting up HTTPS, see
The Network Services
work services, as well as the Web UI display mode, details see:
Services" on page 77.
The Ports panel not only displays STATUS information, but is used also to
set up and manage SecureSync's network ports via three buttons:
INFO button: Displays the Ethernet port Status window for review
purposes.
GEAR button: Displays the Ethernet port settings window for editing
purposes.
TABLE button: Displays a window that allows adding, editing, and
reviewing Static Routes.
1. Navigate to MANAGEMENT > Network
left, click General
2. Populate the fields:
Hostname: This is the server's identity on the network or IP address.
Default IPv4
Default Port, the factory default port
way (default gateway).
panel is used to enable (ON) and disable (OFF) net-
Settings.
Port: Unless you specify a specific Port to be used as
2.14 Configure Network Settings
HTTPS Setup
"HTTPS" on page 81.
Setup. In the Actions Panel
eth0 will be used as the gate-
window. For
"Network
on the
75