Safran SecureSync 2400 User Manual page 423

Connector: BNC
Output Load
Output Pulse/Frequency
Accuracy: Function of input synchronization source (GPS, IRIG, 1 PPS, etc.)
Synchronization: Output frequency locked to SecureSync disciplined
10 MHz
Jitter, cycle-to-cycle: n/a
Phase Noise:
-120 dBc/Hz @ 1kHz offset
-130 dBc/Hz @ 10-kHz offset
-140 dBc/Hz @ 100-kHz offset
Harmonics: <-30 dBc
Spurious: <-60 dBc
Maximum Number of
Ordering
BNC
Figure 5-26: Model 1204-13 option card rear plate
Programmable Frequency Card 1204-2F (TTL, BNC): Spe-
cifications
Outputs: (4) independently programmable square wave outputs
Signal
Wave Form: square
Connector: BNC
Output Load
SecureSync 2400 User Manual
Impedance: 50 Ω
Rates: 1Hz to 25 MHz in 0.1-Hz increments
Cards: 6
Information: 1204-13, Programmable Frequency Card, sine wave,
Type: TTL (BNC)
Impedance: 50 Ω
APPENDIX
407