Monitoring The Oscillator - Safran SecureSync 2400 User Manual

4.5 Quality Management
Displaying the settings of a specific output
The outputs installed in your SecureSync unit have specific settings that can be
reviewed, and—to some extent—edited.
To display the settings of an output:
1. Navigate to
e.g., PPS Output
2. The corresponding Status window will display:
Click the Edit button in the bottom-left corner to configure settings that are user-
editable. See also
4.5.1.7

Monitoring the Oscillator

The Oscillator Management screen provides current and history status inform-
ation on disciplining state and accuracy.
To access the Oscillator Management screen:
312
To edit the settings of a given output, click the GEAR button (see also
figuring Outputs" on
To refresh the information displayed, click the REFRESH button (circling
arrows icon).
In the illustration of the rear panel, click on a connector to highlight the cor-
responding list entry.
INTERFACES >
0):
"Configuring Outputs" on
page 169.)
OUTPUTS, and click on the desired output (recessed
page 169.
CHAPTER •
4 SecureSync 2400 User Manual Rev. 5.2
"Con-